OSSM-hardware
Default base: 3030 Extrusion - Single Pivot Arm
OSSM - 3030 Extrusion Mount
Assembly Guide Videos
Printing
3030 Extrusion Mount Standard Print Settings:
6 Walls
Infill type: Cross Hatch (or gyroid) 25%
Supports: None - **Filament estimate:** 246g - **Recommended filament:** PLA+ - All parts are intended to print in the provided file default orientation.
Printed parts:
(Qty 1) Pivot Plate Left
(Qty 1) Pivot Plate Right
(Qty 8) Handle Spacer
(Qty 4) Extrusion Foot
(Qty 6) Extrusion Cap
Bill Of Materials
(Qty 12) M6x12 Socket Cap Head Bolt
(Qty 6) M6x25 Socket Cap Head Bolt
(Qty 2) M6 Handle 25mm
(Qty 6) M6 Washer
(Qty 20) M6 T-Nut '3030'
(Qty 4) 90 Degree '3030' Corner Bracket
(Qty 2) 1.5" (38mm) Reinforced Rubber Washer
(Qty 4) 1.5" (38mm) Square Non-Slip Furniture Pad
(Qty 1) 20" (508mm) 3030 Extrusion
(Qty 1) 18" (467mm) 3030 Extrusion
(Qty 2) 14" (355mm) 3030 Extrusion
(Recommended) Sandbag
Legacy README
The above BOM is accurate for a new Stand-only assembly. Actuator and PCB Mounting BOM can be found in Mounting
Legacy README retained for Stand assembly reference
//TODO: Needs update for 57AIM30 Gold Motor & PitClamp Mini default build.
You can view the 3D model at OnShape link